[MetotRon]

Hi, sorry for stupid question is it possible to use on devices that has only one partition on SD card is FAT 32. I don't move any cache to my SD card. If it possible, may be your could upload prepared files 1-for phones move cache to SD and 2-for phones doesn't make it.

BR,
Evgeny

[Sponsored Links]

[teknologist]

MetotRon, on Oct 28 2009, 17:55, said:

Hi, sorry for stupid question is it possible to use on devices that has only one partition on SD card is FAT 32. I don't move any cache to my SD card. If it possible, may be your could upload prepared files 1-for phones move cache to SD and 2-for phones doesn't make it.

BR,
Evgeny

[ANSWER REMOVED ON 30/10] -> obsolete, could get new readers confused.

This post has been edited by teknologist: 30 October 2009 - 05:15 PM

[Loxley]

teknologist, on Oct 28 2009, 18:29, said:

OrigDataSize: 28324 kB
ComprDataSize: 6692 kB
MemUsedTotal: 9404 kB
BDevNumReads: 9278
BDevNumWrites: 6906

In my case I have never reached that point because I have never filled the compressed pool...no matter what I do, I haven't managed to fill it up..

PS: note the insane compression ratio I have here! x4.23 ! Means I get 4.23Mb of kernel usable memory for the price of 1Mb in the hardware memory chips...

To do some nitpicking:
MemUsedTotal is the amount of ram compcache uses. 6692 KB of that are compressed pages, so the actual ratio is 3.05, which is quite good.
BDevNumWrites is the number of pages that have been written to the device on sd.

Reference: http://code.google.c.../StatsExplained

Have a nice day

Niki

[teknologist]

StureM, on Oct 28 2009, 17:39, said:

Hello,

I have tried your update and it made the phone even faster then it was with Paul's ROM. Great work to you and Paul for makeing my phone better

I don't know how many who reads this forums is as bad as me to understand how to do all these updates, I need everthing fed into my head with a big big spoon..
The part which took me some time to figure out was this one:

"Once you are done editing userinit.sh, copy it to /system/sd using your favorite tool...(that's the only part where you need to be familiar enough with android tweaking)"

I do not know if there are many ways to do so, I first shaked my fist in anger cause I could not move/copy this file with Astro filemanager when browsing the phone.
I eventually found out I had to use the "ADB Shell" commands.

Can you write in your guide tips how to do this, I guess I'm not the only one who really enjoy the work you are doing, but haveing a hard time understanding what to do all the time.

BR
Sture

For the adb shell feel free to post you guides here ! I am a bit short on time to do that but topic is open so you are encouraged to contribute!

PS: I do have a real life away from computers/kernels... ;-)

This post has been edited by teknologist: 28 October 2009 - 06:11 PM

[PaulOBrien]

Pinned and added version info to topic title.

P

[PaulOBrien]

teknologist, is your kernel source online at all?

This looks interesting... http://jaysonking.co....6.27-backport/

P

[Khrushchev]

hey guys,

The rom sounds really great, but im SO confused with all this code stuff. I dont even know how to do all this ADB stuff.
I've tried google but can't find something that tells me how to do it.

could you please explain some of the more difficult things? like you said use your favourite tool. WHAT TOOL? im so lost.

I used the new Amon Ra recovery to partition my SD card, but cant seem to install a ROM which uses swap..
plz help

Khrush

[chuti98]

Is it possible to included userinit.sh in the rom automatic? Or have to execute uerinit.sh manually after up rom

[Moenmann]

THANK YOU! This is fantastic! I never thought Paul's ROM could be any faster.. But my Hero now flies. I would love to se this as a part of MCR!

[trstn]

Install was easy using the CM updater Paul packaged up a while back, phone definitely feels snappier, a lot snappier. Thanks for your hard work.

Can't wait for future releases, but not looking forward to the extra work when the next MoDaCo rom gets released, seem to be gaining update.zips to install from all over

[ratcom]

Khrushchev, on Oct 28 2009, 19:43, said:

hey guys,

The rom sounds really great, but im SO confused with all this code stuff. I dont even know how to do all this ADB stuff.
I've tried google but can't find something that tells me how to do it.

could you please explain some of the more difficult things? like you said use your favourite tool. WHAT TOOL? im so lost.

I used the new Amon Ra recovery to partition my SD card, but cant seem to install a ROM which uses swap..
plz help

Khrush

I strongly advise you to read this ADB for Dummies before you do anything!
Then read most of these to answer your question Information on everything
Good luck.


@teknologist

Well done mate and thanks you! I have lots to play with now this weekend

[BTJ]

When I try to load the ramzswap module I get an error saying invalid parameter:

/system/xbin/insmod /system/lib/modules/compcache/ramzswap.ko memlimit_kb=64200 backing_swap=/dev/block/mmcblk0p3
insmod: can't insert '/system/lib/modules/compcache/ramzswap.ko': invalid parameter

What am I missing?


Edit: Did something I should have done a log time ago; ran dmesg...:

ramzswap: Using backing swap device: /dev/block/mmcblk0p3
[  246.405792] ramzswap: memory limit set to 64200 kB
[  246.410919] Cannot use backing swap with bad pages (4294967295)
[  246.411193] ramzswap: Error setting swap header
[  246.411804] ramzswap: Initialization failed: err=-22

What does this mean? That my card has errors or?


Edit2: Never mind... Forgot I was using fdisk to create the swap partion. i.e. no filesystem was created on my swap partition....


Regards,

BTJ

This post has been edited by BTJ: 28 October 2009 - 10:28 PM

[PaulOBrien]

I will package the latest Teknologist kernel in future ROMs.

P

[jaysire]

Paul, on Oct 29 2009, 00:26, said:

I will package the latest Teknologist kernel in future ROMs.

Do you have any ballpark on when that will happen? If I was expecting a new Modaco ROM in a couple of days, I would probably not try this kernel, but if you tell us it might be weeks, then I'll give the Teknologist kernel a shot right now...

Thanks to both for your work!

-JJ

[Khrushchev]

ratcom, on Oct 28 2009, 23:46, said:

I strongly advise you to read this ADB for Dummies before you do anything!
Then read most of these to answer your question Information on everything
Good luck.
@teknologist

Well done mate and thanks you! I have lots to play with now this weekend

You my good sir, are a freakin saint.

after some fiddling, i figured it out.
thank you so much

Khrush

[clarkEEE1]

For all them that don't know what your on with I suggest you start reading pauls main thread only 100 + pages long all the info you need about everything. If you still don't understand it read it again might take a while but least you won't be asking millions of questions.

[drewstiff]

I have it all set up and seems to be working (according to cat command) but wondered if I am meant to leave 'Swapper' installed as I think 'Swapper' is using the swap... er... as well? Or is Swapper a necessity for what we're doing here?


Will report back with comments regarding speed etc. tomorrow once it's been put through its paces a bit. Sleep time for me now!

[fayda]

could someone please tell me how to increase the size of my swap partition

thanks in advance

[clarkEEE1]

fayda, on Oct 29 2009, 00:47, said:

could someone please tell me how to increase the size of my swap partition

thanks in advance

Yeah the same way as you made your last swap partition but make it bigger.

If you were clever enough to make one surely you can do it again.

This post has been edited by clarkEEE1: 29 October 2009 - 12:00 AM

[fayda]

clarkEEE1, on Oct 28 2009, 23:58, said:

Yeah the same way as you made your last swap partition but make it bigger.

If you were clever enough to make one surely you can do it again.

i used the option in the recovery-RA-HERO-v1.2.3 and thats only 32mb

[Sponsored Links]